Pelco es3012 1, 2, 3

Pelco Manual C306M-K (4/05) 9

PAN AND TILT INSTALLATION

1When installing the ES3012 Esprit

system, allow for sufficient clear-

ance between the top of the unit

and overhead obstructions. This will

prevent interference when the en-

closure is driven to its maximum el-

evation of 40 degrees.

2Remove the transformer module

from the base of the system by

loosening the four Phillips screws

and lifting the module.

3Attach the base of the system to an

Esprit mount (EWM or EPP) with

the three flathead 10-32 x 1/2-inch

screws and washers (supplied).

17.06

(43.33)

6.77

(17.20)

40°

8.30

(21.08)

4.67

(11.86)

NOTE:

The illustrations show

the ES3012 Esprit mounted

to an EWM wall mount.

01475

BASE

MOUNTING

SCREWS

MOUNT

LOOSEN

PHILLIPS

SCREWS

TRANSFORMER

MODULE

BASE

Contents

Main Page Pelco Manual C306M-K (4/05) 3 CONTENTS Page Pelco Manual C306M-K (4/05) 5 IMPORTANT SAFETY INSTRUCTIONS 6 Pelco Manual C306M-K (4/05) DESCRIPTION MODELS INSTALLATION CAMERA AND LENS INSTALLATION Pan and Tilt Installation A B C 3 4 5 PAN AND TILT INSTALLATION 1 2 3 The illustrations show the ES3012 Esprit mounted to an EWM wall mount. 4 5 6 7 8 9 10 Page HOW TO REINSTALL THE PAN AND TILT COVER OPERATION POWER-UP DISPLAY Operating Notes Programming Power-Up Mode in the Programming PAN, SCAN, AND TILT SPEEDS LENS FUNCTIONS PRESET FUNCTIONS RANDOM, FRAME, AND AUTO SCANNING ZONES PROGRAMMING ESPRIT MENUS PRESETS ACCESSING MAIN MENU (PRESET 95) if this is your first time entering this mode AZ/EL Az/El display is not available while you are AZ/EL LINE Az/El display is not available while you are AZIMUTH ZERO DIRECTION For direction to be accurate, the azimuth zero must be set to magnetic north. Direction display is not available while you are programmming or running a DIRECTION LINE Direction display is not available while you are DISPLAY DURATION LIMIT STOPS TURNING LIMIT STOPS ON OR OFF PROGRAMMING LIMIT STOPS Manual Limit Stops Scan Limit Stops PAN/SCAN SPEED PARK TIME NOTE: CAUTION: PATTERN LENGTH POWER-UP MODE SPEED PROFILE ZONES ZONE BLANK 30 Pelco Manual C306M-K (4/05) TROUBLESHOOTING MAINTENANCE Troubleshooting Warranty and Return Information 32 Pelco Manual C306M-K (4/05) APPENDIX Esprit will sense and automatically select input from Coaxitron Table A. Switch Settings for SW1 NOTES: Pelco Manual C306M-K (4/05) 33 Table B. Switch Settings for SW2 (Continued on next page) NOTE: 34 Pelco Manual C306M-K (4/05) Table B. Switch Settings for SW2 (continued) (Continued on next page) Pelco Manual C306M-K (4/05) 35 Table B. Switch Settings for SW2 (continued) SPECIFICATIONS (Design and product specifications subject to change without notice.) Pelco Manual C306M-K (4/05) 37 Figure 1. Esprit ES3012 System Dimensions Drawing REGULATORY NOTICES REVISION HISTORY Product Warranty and Return Information. section. In March, removed wiper material from Troubleshooting Trouble- shooting