C311M-L (1/05) 7
INSTALLATION
When installing the ES30PC/ES31PC Esprit® system, allow for sufficient clearance between the top of the unit and overhead
obstructions. This will prevent interference when the enclosure is driven to its maximum elevation of 33 degrees.
Remove the transformer module from the base of the system by loosening
the four Phillips screws and lifting the module.
LOOSEN
PHILLIPS
SCREWS
TRANSFORMER
MODULE
BASE
Attach the base of the system to an Esprit mount (EWM or EPP) with the
three flathead 10-32 x 1/2-inch screws and washers (supplied).
01475
BASE
MOUNTING
SCREWS
MOUNT