Pelco FR8304 manual Rear Panel

REAR PANEL

All connections to the FT8304 transmitter and the FR8304 receiver are made to the rear panel of the modules (refer to Figure 4).

FT8304	FR8304
TRANSMITTER	RECEIVER

Figure 4. Rear Panel of FT8304 Transmitter and FR8304 Receiver

RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack- mounted module

STAND-ALONE POWER CONNECTOR, 2-pin connector for power connection of stand-alone module; removable mating connector with screw terminals (not shown)

FIBER OPTIC CONNECTOR, ST or FC (dependent on FT8304/FR8304 model)

VIDEO IN CONNECTORS 1-4, 75-ohm BNC analog video input (transmitter only)

VIDEO OUT CONNECTORS 1-4, 75-ohm BNC analog video output (receiver only)

For additional information about rear-panel connections, refer to the Installation section.

C1644M-B (6/06) 11