Pelco FR8304 manual Connections

CONNECTIONS

Connections to the FT8304 transmitter and the FR8304 receiver are made on the rear panel of the modules and consist of the following:

•Power connection

NOTES:

–A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as Class 2 and rated as 24 VAC, 300 mA (minimum output).

–In extreme temperature conditions, it is recommended that an industrial-rated outdoor power supply such as the Pelco WCS1-4 power supply be used.

•Fiber connection

•Video input connections (transmitter only)

•Video output connections (receiver only)

Figure 6 provides an illustration of FT8304 transmitter/FR8304 receiver connections.

POWER/ALARM CONNECTION

FOR RACK-MOUNTED MODULE

POWER CONNECTION

FOR STAND-ALONE MODULE

FIBER OPTIC CABLE

COAXIAL CABLE

COAXIAL CABLE

COAXIAL CABLE

COAXIAL CABLE

Figure 6. FT8304 Transmitter/FR8304 Receiver Connections

C1644M-B (6/06) 15