Manuals / Hasselblad / Computer Equipment / Scanner

Hasselblad 949 Technical Information, Specifications, Scanner supported, Weight, Maximum batch

Models: 949

1 36

Download 36 pages 57.79 Kb

Page 34

Technical Information

34

Technical Information

Specifications

Scanner supported	Flextight 949
Scanner footprint with feeder	36 x 42 cm
Weight	3.1 kg
Maximum batch	50 slides
Original types	35 mm slides
Scan software	FlexColor 4.0.2 or later
Computer OS	Mac OS X 10.2.1 (or later)
	Windows 2000 (or later)
	(See FlexColor data sheet or manual
	for full computer requirements)
Maximum resolution	up to 8000 ppi
Scanning speed	50 slides scanned to 50 MB 3f files
	takes approximately 60 minutes.

Image 34

Hasselblad 949 manual Technical Information, Specifications, Scanner supported, Scanner footprint with feeder, Weight

Contents

User’s Guide by HasselbladSlide Feeder for Flextight 949 Scanners Page Table of Contents Introduction Important Warnings and RestrictionsFor Macintosh Users System RequirementsFor Windows Users Figure 1 Features of the Slide Feeder Feeder DiagramC Magazine drawer with magazine and slides mounted this is where Figure 2 Slide original holder features Slide Original Holder DiagramA B C D E F Mounting and Unmounting the Slide Feeder Mounting the Slide FeederClick on the Mount button Page 11. Turn on the scanner by pressing its on/off switch Click on Continue in the Mount feeder windowA B C D Figure 6 Inserting the Slide original holder 18. Click on Done to close the Feeder window 20. The Slide Feeder is mounted and ready for useUnmounting the Slide Feeder 5. The Mount feeder window updates with new instructions Figure 8 Removing the slide original holder9. Open the scanner light table and switch on the power 7. The Mount feeder window updates with new instructions8. Click on Done in the Mount feeder window Loading Slides Loading Directly into the FeederUsing a Second Magazine Figure 10 Removing the magazine drawer from its hinge 4. Place the drawer flat on a table with its magazine facing upFigure 12 The bottom end of the magazine has a broad metal plate Scanning with the Slide Feeder Batch Scanning with 3fAll images will have a name based on the value entered in the Image Name field, plus a unique numberPage Scanning Individual Slides 1. Click on the Batch Scan button to open the Batch Scan window Page Troubleshooting Problem I am not able to mount the Feeder to my scannerPage Checking the Alignment Aligning the FeederCorrecting the Alignment 5. Tighten the nuts again Preparing the Slide Feeder for Storage or Transport Preventive Maintenance DisposalWeight SpecificationsTechnical Information Maximum resolutionCE Declaration