Hasselblad 949 manual Click on the Batch Scan button to open the Batch Scan window

26

1.Click on the Batch Scan button to open the Batch Scan window.

2.If it is not already shown, expand the Feeder heading in the Batch Scan window by clicking on the triangle next to the heading.

3.Set the Position field to the slide number you wish to scan. You can enter the number directly using your keyboard, or select it by clicking on the up and down buttons next to the field.

4.In the main FlexColor window, make sure that the auto-focus button (labeled AF) is enabled. You must always enable auto-focus when scanning slides because mountings can vary in thickness and each slide may sit slightly differently in its mounting.

5.Click on Preview in the main FlexColor window. The scanner then advances the Feeder to your selected slide and makes a preview.

6.Make image settings, such as rotation, crop, corrections and output size, using the various FlexColor tools as described in the FlexColor User’s Guide.

7.Either make a final scan now by clicking on Scan in the main FlexColor window or add the image to the Manual list in the Batch Scan window by clicking on the Add button there (this enables you to set up several scans based on their previews and then scan them all at once later).