Manuals / Hasselblad / Computer Equipment / Scanner

Hasselblad 949 manual System Requirements, For Macintosh Users, For Windows Users

Models: 949

1 36

Download 36 pages 57.79 Kb

Page 5

System Requirements

•Install the scanner and Slide Feeder in a location where they are not accessible by children. The units contain small openings and moving parts that can cause injury.

•Do not touch the Slide Feeder while the magazine is moving.

•Do not touch the originals or the original holder during scanning.

•When you switch on the scanner with the Slide Feeder attached, the unit move the Feeder into its “home” position if it is not already there. Do not touch the Slide Feeder while the magazine is moving.

•When using the Slide Feeder, a huge amount of data is often generated. Be sure to allocate ample hard disk space for scanned images.

•Before servicing the scanner and/or Slide Feeder, remove the power supply from the mains (unplug the scanner). It is not sufficient simply to press the on/off button on the scanner.

System Requirements

For Macintosh Users

•Flextight 949 Scanner

•A computer running Mac OS 10.2.1 or later

•FlexColor 4.0.2 or later for Mac OS

For Windows Users

•Flextight 949 Scanner

•A computer running Windows 2000 or XP

•FlexColor 4.0.2 or later for Windows

Image 5

Hasselblad 949 manual System Requirements, For Macintosh Users, For Windows Users

Contents

Slide Feeder for Flextight 949 Scanners by HasselbladUser’s Guide Page Table of Contents Important Warnings and Restrictions IntroductionFor Windows Users System RequirementsFor Macintosh Users C Magazine drawer with magazine and slides mounted this is where Feeder DiagramFigure 1 Features of the Slide Feeder A B C D E F Slide Original Holder DiagramFigure 2 Slide original holder features Mounting the Slide Feeder Mounting and Unmounting the Slide FeederClick on the Mount button Page Click on Continue in the Mount feeder window 11. Turn on the scanner by pressing its on/off switchA B C D Figure 6 Inserting the Slide original holder 20. The Slide Feeder is mounted and ready for use 18. Click on Done to close the Feeder windowUnmounting the Slide Feeder Figure 8 Removing the slide original holder 5. The Mount feeder window updates with new instructions8. Click on Done in the Mount feeder window 7. The Mount feeder window updates with new instructions9. Open the scanner light table and switch on the power Loading Directly into the Feeder Loading SlidesUsing a Second Magazine 4. Place the drawer flat on a table with its magazine facing up Figure 10 Removing the magazine drawer from its hingeFigure 12 The bottom end of the magazine has a broad metal plate Batch Scanning with 3f Scanning with the Slide FeederImage Name field, plus a unique number All images will have a name based on the value entered in thePage Scanning Individual Slides 1. Click on the Batch Scan button to open the Batch Scan window Page Problem I am not able to mount the Feeder to my scanner TroubleshootingPage Correcting the Alignment Aligning the FeederChecking the Alignment 5. Tighten the nuts again Preparing the Slide Feeder for Storage or Transport Disposal Preventive MaintenanceTechnical Information SpecificationsWeight Maximum resolutionCE Declaration