11
10.Grasp the Slide Feeder firmly with one hand while holding the batch- scan door open on the scanner with your other hand. Align the pins and connector on the back of the Feeder with the holes and connector inside the scanner. Gently press the Feeder down and in place, making sure that the Feeder sits firmly and has a good connection with the connector.
11.Turn on the scanner by pressing its on/off switch.
12.FlexColor detects that the scanner has been turned back on. The Mount feeder window updates with new instructions.
Click on Continue in the Mount feeder window.
13.The scanner repositions its drum and then the Mount feeder window updates again, asking you to mount the holder.
14.Open the magazine drawer by grasping it at the top and pulling it down. It rotates forward on its hinge (B) and then stops, exposing the magazine (C) with magazine drawer top (D) facing out (see Figure 5, below). Note also the
