Manuals / Hasselblad / Computer Equipment / Scanner

Hasselblad 949 manual Unmounting the Slide Feeder

Models: 949

1 36

Download 36 pages 57.79 Kb

Page 15

Unmounting the Slide Feeder

15

Unmounting the Slide Feeder

To unmount the feeder, you must always use the software-guided procedure below to ensure that the scanner drum and the magazine drawer are positioned correctly before detaching.

1.Turn on the scanner and launch the FlexColor software.

2.Select Maintenance > Feeder from the menu bar.

3.The Feeder window opens.

Press the Unmount button. The feeder will move the slide magazine drawer into storage position

4. FlexColor displays the Mount feeder window.

As instructed in the window, open the magazine drawer by grasping it at the top and pulling it down. Then click Continue to go on to the next step.

Image 15

Hasselblad 949 manual Unmounting the Slide Feeder

Contents

by Hasselblad User’s GuideSlide Feeder for Flextight 949 Scanners Page Table of Contents Important Warnings and Restrictions IntroductionSystem Requirements For Macintosh UsersFor Windows Users Feeder Diagram Figure 1 Features of the Slide FeederC Magazine drawer with magazine and slides mounted this is where Slide Original Holder Diagram Figure 2 Slide original holder featuresA B C D E F Mounting the Slide Feeder Mounting and Unmounting the Slide FeederClick on the Mount button Page Click on Continue in the Mount feeder window 11. Turn on the scanner by pressing its on/off switchA B C D Figure 6 Inserting the Slide original holder 20. The Slide Feeder is mounted and ready for use 18. Click on Done to close the Feeder windowUnmounting the Slide Feeder Figure 8 Removing the slide original holder 5. The Mount feeder window updates with new instructions7. The Mount feeder window updates with new instructions 9. Open the scanner light table and switch on the power8. Click on Done in the Mount feeder window Loading Directly into the Feeder Loading SlidesUsing a Second Magazine 4. Place the drawer flat on a table with its magazine facing up Figure 10 Removing the magazine drawer from its hingeFigure 12 The bottom end of the magazine has a broad metal plate Batch Scanning with 3f Scanning with the Slide FeederImage Name field, plus a unique number All images will have a name based on the value entered in thePage Scanning Individual Slides 1. Click on the Batch Scan button to open the Batch Scan window Page Problem I am not able to mount the Feeder to my scanner TroubleshootingPage Aligning the Feeder Checking the AlignmentCorrecting the Alignment 5. Tighten the nuts again Preparing the Slide Feeder for Storage or Transport Disposal Preventive MaintenanceMaximum resolution SpecificationsTechnical Information WeightCE Declaration