Manuals / Hasselblad / Computer Equipment / Scanner

Hasselblad 949 manual Tighten the nuts again

Models: 949

1 36

Download 36 pages 57.79 Kb

Page 31

5.Tighten the nuts again.

31

Figure 13: Unlocking/locking the Feeder position. Two nuts hold the Feeder in place—one is visible above; the other is located on the other side of the mounting plate, close to the connector.

3.Use a wrench to loosen both of the nuts just slightly, but do not remove them.

4.Adjust the position of the mounting plate in the direction and distance indicated from your inspection of the original holder position above.

5.Tighten the nuts again.

6.Use the software-assisted procedure to mount the Feeder to the scanner as described in “Mounting the Feeder” on page 8.

7.Inspect the slide original holder alignment once again. Repeat this procedure as necessary until the holder is positioned in the exact center of the slide feeder when it is mounted.

Image 31

Hasselblad 949 manual Tighten the nuts again

Contents

User’s Guide by HasselbladSlide Feeder for Flextight 949 Scanners Page Table of Contents Important Warnings and Restrictions IntroductionFor Macintosh Users System RequirementsFor Windows Users Figure 1 Features of the Slide Feeder Feeder DiagramC Magazine drawer with magazine and slides mounted this is where Figure 2 Slide original holder features Slide Original Holder DiagramA B C D E F Mounting the Slide Feeder Mounting and Unmounting the Slide FeederClick on the Mount button Page Click on Continue in the Mount feeder window 11. Turn on the scanner by pressing its on/off switchA B C D Figure 6 Inserting the Slide original holder 20. The Slide Feeder is mounted and ready for use 18. Click on Done to close the Feeder windowUnmounting the Slide Feeder Figure 8 Removing the slide original holder 5. The Mount feeder window updates with new instructions9. Open the scanner light table and switch on the power 7. The Mount feeder window updates with new instructions8. Click on Done in the Mount feeder window Loading Directly into the Feeder Loading SlidesUsing a Second Magazine 4. Place the drawer flat on a table with its magazine facing up Figure 10 Removing the magazine drawer from its hingeFigure 12 The bottom end of the magazine has a broad metal plate Batch Scanning with 3f Scanning with the Slide FeederImage Name field, plus a unique number All images will have a name based on the value entered in thePage Scanning Individual Slides 1. Click on the Batch Scan button to open the Batch Scan window Page Problem I am not able to mount the Feeder to my scanner TroubleshootingPage Checking the Alignment Aligning the FeederCorrecting the Alignment 5. Tighten the nuts again Preparing the Slide Feeder for Storage or Transport Disposal Preventive MaintenanceMaximum resolution SpecificationsTechnical Information WeightCE Declaration