Pelco HS4514 manual Specifications, Mechanical, Electrical, General

Specifications

MECHANICAL
Camera Mounting	Removable camera sled that can be inverted to accommodate various cameras and lenses
Maximum Camera and Lens Size	Accepts camera and lens combinations (including BNC connector) up to:
HS4514	6.70" H x 5.25" W x 14.0" L (17.02 x 13.34 x 35.56 cm)
HS4514-1/-2	6.25" H x 3.75" W x 12.0" L (15.88 x 9.53 x 30.48 cm)
Cable Entry	Two openings 0.875-inch (2.22 cm), will accept PG-13.5 watertight fittings. Maximum cable diameter
	0.47-inch (1.19 cm) or 1/2-inch (1.27 cm) conduit fittings (fittings not provided).
Lock	Four 1/4-20 tamper-resistant screws (#10 1/4-inch drive socket for removing screws supplied; 1/4-inch
	drive tool not provided)
ELECTRICAL
Power Input	24, 120, or 230 VAC; 50/60 Hz
Heater Power Consumption	120 VAC	24 VAC	230 VAC
HS4514-1/-2	60 watts	50 watts	55 watts
	Heater is thermostatically controlled to activate ON at 42°-58°F (6°-14°C) and OFF at 72°-88°F (22°-31°C)
Electrical Connections	One each of the following:
	3-pin connector terminal block for power input
	6-pin lens connector
	9-pin connector terminal block for lens wiring
	10-pin connector terminal block for camera/lens wiring
	2-pin connector terminal block for spare connections
	3-pin socket for camera power input
	2-pin socket for optional camera power input
	4-pin socket for heaters
GENERAL
Construction Body	0.134-inch thick steel
Viewing Window	1.25-inch (31.75 mm) thick, optically clear, LEXGARD® RS1250 laminate with MARGARD®surface
	(UL 752, Level 6 rated)
Viewing Window Area	3.44" H x 4.75" W (8.74 x 12.07 cm)
Finish	Gray polyester powder coat
Ratings	Meets IP 55 and NEMA Type 3 standards
Environment	Indoor/outdoor; -10° to 100°F (-23° to 38°C)
Dimensions	20.07" L x 6.32" W x 6.13" H (50.98 x 16.05 x 15.57 cm)
Weight	27 lb (12.25 kg)

(Design and product specifications subject to change without notice.)

C1472M-E (1/07) 13