6 C2478M-B-ML (2/05)
Site Installation
English
1
Feed the supplied wiring harness into the front of the mount and out the
back of the mount. Connect the wires as required. Refer to Tables A, B,
and C for cable and wiring information. Fasten the mount to the mounting
surface. Refer to the instructions supplied with the mount.
2
Remove the back box mounting plate: Loosen the nuts on top of the back
box, and then turn the mounting plate clockwise and lift.
3
Thread the wiring from the mount through the mounting plate, and
then attach the mounting plate to the mount. If outdoors, apply thread
compound (provided) to the threads on the mounting plate.
4
Attach the connector of the wire harness to the mating connector located
on the top of the back box. Insert the studs and nuts on top of the back box
into the mounting plate, turn the back box counterclockwise, and then
tighten the three nuts.