Pelco IS20CHV10S ASSEMBLING THE CAMERA

22 C3472M-C (9/10)

ASSEMBLING THE CAMERA

1. Mount the top cover (refer to Figure15):

a. Adjust the marker of this unit to “I” on the top cover to install the top cover.

Figure 15. Mounting the Top Cover

b. Rotate the top cover clockwise to adjust the marker to “II.”

ìMarker

îTop Cover

ïDome Cover Block

Contents

Main Contents Important Safety Instructions CAUTION: UL LISTED MODELS WARNINGS Precautions Page Regulatory Notices RADIO AND TELEVISION INTERFERENCE Limitation of Liability Disclaimer of Warranty Description MODELS PARTS LIST SURFACE MODELS FLUSH MODELS Product Overview ~ ~ ~ Installation DISASSEMBLING THE CAMERA Page MOUNTING THE CAMERA USING A 2-GANG JUNCTION BOX SURFACE MOUNTING FLUSH MOUNTING Page WIRING VIDEO OUTPUT CONNECTION POWER CONNECTION CABLE LENGTH AND WIRE GAUGE 24 V AC Resistance /m 0.078 0.050 0.03 0.018 12 V DC Table C. 24 V AC Recommended Cable Length and Thickness IMAGE ADJUSTMENT PAN, TILT, AND AZIMUTH ADJUSTMENT ZOOM AND FOCUS ADJUSTMENT ASSEMBLING THE CAMERA Page Page Specifications (Weights and dimensions indicated are approximate.) PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY RETURNS REVISION HISTORY