20 C3472M-C (9/10)
3. Rotate the tilting table (±75-degree range) to adjust the tilting position of the camera (refer to Figure12).
NOTES:
• This lens can also be rotated in the reverse direction, but the image azimuth is reversed. In such a
case, turn the panning table to the 180-degree side to correct the azimuth image.
• When used at an angle that is close to horizontal, the shadow of the dome cover may be projected.
Figure 12. Adjusting the Tilting Position (Day/Night Model Shown)
4. Tighten both the panning table lock screw and the tilting lock screws on both sides after adjusting the tilt
position of t he camera. T he recommended tightening torque is 0.59 N.m (6 k
g
f.cm).
5. Rotate the azimuth adjuster (±100-degree range) to adjust the azimuth angle of the image (refer to Figure 13).
Figure 13. Adjusting the Azimuth Angle (Color Model Shown)
ìTilting Lock Screw
ìIndication
îAzimuth Adjuster
75°75°
100°100°