24 C3683M (3/09)
sSoftware Status
•Green: The software is operating normally.
•Amber: A minor software malfunction is detected (for example, an excessive network packet loss).
•Red: A fatal software error has occurred: for example, ceasing to record.
tNetwork Port 1 Speed and Activity
Network status (connection and speed) is indicated by one of the following conditions:
•Off: The unit is not connected to the network.
•Solid Green: The unit is connected to the network using the 1000Base-T standard.
•Solid Amber: The unit is connected to the network using the 100Base-T standard.
•Solid Red: The unit is connected to the network using the 10Base-T standard.
NOTE: For proper operation, you must use the 1000Base-T standard.
uNetwork Port 2 Speed and Activity
Network status (connection and speed) is indicated by one of the following conditions:
•Off: The unit is not connected to the network.
•Solid Green: The unit is connected to the network using the 1000Base-T standard.
•Solid Amber: The unit is connected to the network using the 100Base-T standard.
•Solid Red: The unit is connected to the network using the 10Base-T standard.
NOTE: For proper operation, you must use the 1000Base-T standard.
~í Unit Status
Unit status is indicated by one of the following three colors:
•Green: The unit is functioning normally.
•Amber: The unit is in configuration mode.
•Red: The unit is in an error condition (refer to Troubleshooting on page 26).
~â USB 2.0 Port: One USB 2.0 port on the front panel.