34 C611M-B (7/05)
Table C. Client PC System Requirements
Before beginning the following procedure to access the NVR300 from a client PC, contact your system administrator for the IP address of the
NVR300 that you will be accessing. You must know the IP address to perform the procedure.
To access the NVR300 from a client PC, do the following. In the Address bar of Microsoft Internet Explorer, enter the IP address of the NVR300
and then click the Go button.
Either of the following occurs:
•If you are required to log in to the NVR300, a dialog box appears allowing you to enter a user name and password. Refer to the Logging In
to the NVR300 section for log-in instructions.
•If you are not required to log in to the NVR300, the NVR-Playback page of the NVR300 appears.
SETTING USER ACCESS LEVELS AND ASSOCIATED PASSWORDS
NOTES:
•Setting user access levels and associated passwords must be performed by the system administrator or by other authorized personnel only.
•Setting the user access level password is optional; however, doing so prevents unauthorized use of the NVR300 by providing password
protection. The NVR300 does not provide password protection by default for the user access level, but it does for the service access level.
The default service password is pel2899100co.
The NVR300 provides user access levels that determine user privileges, that is, the actions that can be performed by a user when operating the
NVR300. Table D provides a list of user access levels and associated privileges.
Table D. User Access Levels and Associated Privileges
Hardware
Requirements
Processor: Intel® Pentium® 4, 2.4 GHz or higher
Memory: 1 GB of RAM
Graphics card: Standard PC graphics card that supports DirectX® 9.0 or higher
Network Interface: Ethernet 10/100/1000 BaseT as needed
Sound Card: Optional
Software
Requirements
Windows® 2000, Windows XP Service Pack 2 (which includes Microsoft Virtual
Machine that must be installed on the client PC)
Microsoft Internet Explorer 6.0 (provided on NVR300 Resource CD)
DirectX 9.0 (provided on NVR300 Resource CD)
MPEG ActiveX (latest PelcoNet version, which is provided on NVR300 Resource
CD or can be downloaded from NVR300 Web server)
User Access Level User Access Privileges
User Allows partial access to the NVR300. Enables the user to do the following:
•Search for, play, save, and take snapshots of recordings using the NVR-Playback
page
•Monitor operational status of NVR300 from the NVR-Status page.
Service Allows full access to the NVR300. Enables the user to do the following:
•Set user access levels and associated passwords using the NVR-Config page
•Set software license using the NVR-Config page
•Program new recordings and edit, schedule, and stop existing recordings using
the NVR-Setup page
•Search for, play, delete, save, and take snapshots of recordings using the NVR-
Playback page
•Monitor operational status of NVR300 from the NVR-Status page
Service is the administrative level and is the highest access level.