Pelco NVR300 - page 24

24 C611M-B (7/05)
Figure 13. HDDIs Added
5. The ACSGateway Config window should look similar to Figure 13.
If you do not see anything listed on the right side of the window, double-click the newly-created server. If nothing appears after that then
either the IP address was incorrect or there is a connection issue.
If there is only one DX9200HDDI attached to the NVR300, then only one will be listed on the right side of the window. The RAID manager
software automatically detects what is attached to the NVR300.
Click Setting. The Event Notification tab appears.
Figure 14. Event Notification
6. Checkmark the boxes shown in Figure 14.
7. Click the E-Mail Setting tab. The E-Mail Setting page appears.