Pelco manual Master Control PM500, Master Control PM600

WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS

MASTER SECTION DESCRIPTION PM500 AND PM600:

	DIGITAL DELAY SECTION:
	The built in digital delay will process the sig-
	nal from the input channels and feed to the
	master output. The effects of digital delay
	are controlled by:
	TIME: This adjusts the internal time of the	PM500
	delays. Turn to the right to increase the
	interval time between two delays, turn to the
	left to decrease.
	REPEAT: This increases the repeat rate of
	the delays by turning the knob to the right.
PM600	VOLUME: This knob adjusts the mix level of
	the effect.

MASTER CONTROL PM500:

The Master Control adjusts the final level of the Main bus signal which is output to the speakers.

MASTER CONTROL PM600:

The Master Control on the PM600 also offers a three band (MID, LOW and HIGH) EQ section for tonal adjustment of the final mix.

PM Series Instruction Manual Page 6