WHARFEDALE PROFESSIONAL PM SERIES POWERED MIXERS
TAPE IN AND REC OUT PM500 AND PM600:
The TAPE IN sockets allow cassette recorders or CD players to be added to the Main output. The RECORD OUTPUT provides a signal output to a cassette deck and home audio equipment. Sockets are RCA Phono.
REAR PANEL DESCRIPTION PM500:
1
2
3 
4
PM500:
1.MAIN LINE OUT: This unbalanced insertion point allows the main output to be sent to an external signal processor or power amplifier. The insert is a 1/4” phono jack socket which is not bypassed.
2.SPEAKER OUTPUT JACKS: These outputs allow two speakers to be connected at the same time to the powered mixer. The total minimum load required is 4 Ohms. If the total load is less than 4 Ohms it may result in the mixer being damaged. The following guidelines should be noted:
When using two speakers at the same time, use
3.FUSE: Always ensure that the fuse is of the correct rating.
4.ALUMINIUM HEATSINK: This allows a cooling airflow through the unit. Make sure that the heatsink is free from dust and there is sufficient room left at the back of the unit to allow the heatsink to work efficiently.
PM Series Instruction Manual Page 7
