Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation.
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE IN 2
GALLONS , AND 5 GALLONS CAPACITY
THROUGH LOCAL SEARS STORE OR
SERVICE CENTER.
WATER HEATER INSTALLATION KIT WITH
FLEXIBLE CONNECTORS FOR 3/4" OR 1/2"
THREADED OR COPPER PLUMBING
DRAIN PANS AVAILABLE IN 20" DIAMETER FORWATER HEATERS HAVING A DIAMETER 18" OR LESS,
24" DIAMETER FOR WATER
HEATERS HAVING A DIAMETER 22"
OR LESS AND AVAILABLE IN 28" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 26" OR LESS.
Basic Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local Sears store.
Pipe Wrench (2)
6 Foot Tape or Folding Rule
Garden Hose
Drill
Screwdriver
Pipe Dope or Teflon Tape
DRILL
ROLL OF TEFLON TAPE (USE ON
WATER CONNECTIONS) | PHILLIPS | SCREWDRIVER |
PiPE DOPE (SQUEEZE TUBE)
USE FOR WATER CONNECTIONS
GARDEN HOSE | 6 FOOT TAPE | PiPE WRENCH |
Additional Tools Needed When Sweat
Soldering
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
HACKSAW
ROLL | OF | ROLL OF |
|
EMERY | CLOTH | SOLDER | |
|
| SOFT SOLDER | FLUX |
3/4" (19 mm) WIRE BRUSH
PROPANE
TORCH | 1/2" (13 ram) WIRE BRUSH |
