Pelco Manual C671M (1/01) 25

MAIN MENU
00259
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press MENU to exit.
<DISPLAY>
DISPLAY MODE
TIME DATE SIZE
BLUE BACK
e.g.<MODE 1>
07-09

Figure 13. Main Menu

The contents of the Main menu are as follows. Access it by pressing the MENU button.
• DISPLAY
Sets the format to display the time and date on the monitor.
•TIMER PROGRAM
Sets the timed recordings.
•RECORDING SET UP
Sets the alarm recording mode, alarm recording duration, emergency recording, etc.
•REAR TERMINAL
Sets the number of frames or fields to record for CLK OUT, output signal of the CALL
OUT terminal, the MODE OUT terminal, etc.
•MAINTENANCE
Displays the power loss list, alarm list, etc. Also, initializes all menu settings. Clears
the power loss list and alarm list.
•CLOCK/FIRST TIME SET UP
Sets the time and date, quasi v-sync, VCR operation when the end of the tape is
reached, etc.
DISPLAY MENU

Figure 14. Display Menu

DISPLAY MODE
This is where you set the display mode. (Set the current time and date in the Clock/First
Time Set Up menu. Refer to the

Clock/First Time Set Up Menu

section.)
DISPLAY MODE 1 Displays date (month, day, year), time (hour, minute, second),
and alarm recording counter.
DISPLAY MODE 2 Displays date, day of the week (SUN, etc.), alarm recording
counter, time, and recording mode.
DISPLAY MODE 3 Displays nothing until alarm recording starts—then date, day of
the week, alarm recording counter, time, and recording mode are
displayed.
DISPLAY MODE 4 Displays nothing on the monitor, even during alarm recording.
TIME/DATE SIZE
This is where you set the size of the letters in the time and date display.
SMALL The letters become small.
LARGE The letters become large.
BLUE BACK
This is where you set the background color.
ON The blue-colored screen overlays the recorded picture when the menu
is displayed on the monitor.
When the setting is ON and the video signal is not input, the
background color is blue. The warning “NO SIGNAL” flashes on the
screen, and “noSIg” flashes on the fluorescent display.
OFF The recorded picture is overlaid with the menu display.
When the setting is OFF and the video signal is not input, the
background is blue when the menu is displayed on the monitor.