Pelican manual Complete the Installation, PC600-1000Rev N, Page

PC600-1000 Rev N —
Pelican PC600/PC1000 Premium Whole House Water Filter	Page 11

Complete the Installation

1.Turn on the main water supply.

2.Check for leaks.

3.Peel off the protective plastic wrap from the stainless steel tank jackets.

4.Add the Pelican logo sticker in the desired location on the tank.

5.Wax stainless steel tank jacket(s) with wax provided or any other non-abrasive auto wax a minimum of 1-2 times per year or as needed based on the installed environment.

CAUTION:

Avoid high flow rates such as bathtub, utility sinks, hose bibs, multi-headed showers, body sprayers, or anything that is considered high flow for the first 72 hours to avoid flow restrictions caused by carbon blockage of the top basket inside the carbon tank.

CAUTION:

Carbon dust may be released into the water lines of the house/building during the first few days of water use after carbon tank installation. The carbon dust is harmless, but may give the water a gray appearance that should diminish within a week or 10 days depending on water use.

© 2013 Enviro Water Solutions, Inc.	www.pelicanwater.com
3060 Performance Circle, Suite 2, DeLand, FL 32724	(877) 842-1635