Pelican manual Product Operation and Specifications, Important Information, PC600-1000Rev N

Models: PC600

1 16
Download 16 pages 4.47 Kb
Page 4
Image 4
Product Operation and Specifications

PC600-1000 Rev N —

 

 

 

 

Pelican PC600/PC1000 Premium Whole House Water Filter

Page 4

 

 

 

 

 

 

 

 

Product Operation and Specifications

 

 

 

 

 

Specification Description

PC600

 

PC1000

 

 

 

 

 

Max Flow Rate

10

GPM

 

15 GPM

 

 

 

 

 

Minimum Working Pressure

25

PSI

 

 

 

 

 

Maximum Working Pressure

80

PSI

 

 

 

 

Maximum Vacuum

5 inch/127 mm Hg

 

 

 

 

Operating Temperatures

36°F – 120°F

 

 

 

 

pH Range

6 – 11

 

 

 

 

 

 

Important Information

Read these instructions carefully and determine the location of all system components before beginning installation.

Check all applicable plumbing, building, and electrical codes for installation compliance.

Install the system on the main water supply.

Systems that contain electronic components cannot be installed outside in uncovered areas.

Important Information WARNING:

If this or any other system is installed in a metal (conductive) plumbing system, i.e. copper or galvanized metal, the plastic components of the system will interrupt the continuity of the plumbing system. As a result any errant electricity from improperly grounded appliances downstream or potential galvanic activity in the plumbing system can no longer ground through contiguous metal plumbing. Some homes may have been built in accordance with building codes, which actually encouraged the grounding of electrical appliances through the plumbing system. Consequently, the installation of a bypass consisting of the same material as the existing plumbing, or a grounded "jumper wire" bridging the equipment and re- establishing the contiguous conductive nature of the plumbing system must be installed prior to your systems use.

Manual background CAUTION:

When adding a filtration/softening system to homes/buildings supplied by well water, the system should be installed following the pressure tank. DO NOT USE this system for pneumatic or hydro pneumatic applications. If you are using a booster pump, then install this system following the booster pump. If you have questions, please call customer service.

© 2013 Enviro Water Solutions, Inc.

www.pelicanwater.com

3060 Performance Circle, Suite 2, DeLand, FL 32724

(877) 842-1635

Page 4
Image 4
Pelican manual Product Operation and Specifications, Important Information, PC600-1000Rev N