Pelican Installation Overview, Pre-Installation, Bypass Valve Installation, PC600-1000Rev N

PC600-1000 Rev N —

Pelican PC600/PC1000 Premium Whole House Water Filter

Page 6

Installation Overview

Wall

IN

Incoming

Water

Supply

Pre-Filter

OUT

Wall

Outgoing

Water to

House

19"

Whole House Water Filter

Figure 1

Pre-Installation

Bypass Valve Installation

Red Arrow

Quick Connect Nut

Water Filter Head

Whole House

Water Filter

INLET UPFLOW

DOWNFLOW INLET

Figure 2

The Bypass Valve comes pre-assembled and ready to install with the O-Rings, Split Rings, and Quick Connect Nuts. Push the Bypass Valve into the head of the Whole House Water Filter with the unthreaded ends oriented toward the tanks and hand-tighten the Quick Connect Nuts.

Notice:

The bypass valve(s) included with this system are designed for multiple Pelican water systems. This may result in the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass valve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to match the drawing, and push them back down onto the stem.

© 2013 Enviro Water Solutions, Inc.	www.pelicanwater.com
3060 Performance Circle, Suite 2, DeLand, FL 32724	(877) 842-1635