Pella 81470102 installation instructions Cable clamps Jamb covers

© 2009 Pella CorporationPart Number: 81470102

INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR SQUARE DESIGN BAY AND BOW WINDOW WITH SEAT BOARD

Lea las instrucciones en español en el reverso.

Read these instructions thoroughly before performing any steps.

Cable clamps

Jamb covers

(2-1/2" Wide)

Head frame

expander

Flashing tape #1

Flashing tape #2

Knee braces

Always read the Pella® Limited Warranty before purchasing or installing Pella products. By installing this product, you are acknowledging that this Limited Warranty is part of the terms of the sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella product warranty. See Limited Warranty for complete details at http://warranty.pella.com.

Note: These instructions may be used for Square Design Pella Bay and Bow windows that have a head and seat board. Support cables are installed in factory assembled bay and bow combinations.

Caution: The factory-installed support cables must be attached to members capable of supporting 1,300 lbs. If the members are not capable of supporting 1,300 lbs., knee braces must be used in addition to the cables. Bay and bow units are not intended to support any roof structure. Consult an architect, engineer or construction professional if the ability of the members to support the bay or bow is not known.

Installation Instructions for Typical Wood Frame Construction.

These instructions were developed and tested for use with typical wood frame wall construction in a wall system designed to manage water. These instructions are not to be used with any other construction method. Installation instructions for use with other construction methods, multiple units or other bow and bay windows, may be obtained from Pella Corporation, a local Pella retailer, or by visiting http://www.pella.com. Building designs, construction methods, building materials, and site conditions unique to your project may require an installation method different from these instructions and additional care. Determining the appropriate installation method is the responsibility of you, your architect, or construction professional.