NEW CONST NEW CONST
L. Insert backer rod and apply sealant. Install siding, and insert backer rod between the each jamb cover and the exterior finish material as deep as it will go. Apply a bead of high quality exterior sealant on top of the backer rod and a corner bead to the top of the head frame expander. Shape, tool, clean excess sealant. When finished, the sealant should be the shape of an hourglass.
Note: Backer rod adds shape and depth for the sealant line. This method creates a more flexible sealant line capable of expanding and contracting.
7INSTALLING INTERIOR JAMB COVE MOULD
ALL ALL ALL ALL ALL ALL
A.Install the interior cove mould. Remove cove mould from accessory package and dry fit over the installation screws. Install interior cove mould and secure with 1" brads into the jamb and trim.
7A 
