14

Pump Strainer Basket Service (Continued)

10.Ensure that the lid o-ring is properly placed. Seat the clamp and lid then turnclockwise until thehandles are horizontal as shown.

11.Reconnect the communication cable to the pump if required.

12.Switch the power ON at the circuit breaker. Reset the pool time clock to the correct time.

WARNING — FILTER OPERATES UNDER HIGH PRESSURE. WHEN

ANY PART OF THE CIRCULATING SYSTEM (e.g., LOCK RING,

PUMP, FILTER, VALVES, ETC.) IS SERVICED, AIR CAN ENTER

THE SYSTEM AND BECOME PRESSURIZED. PRESSURIZED

AIR CAN CAUSE THE LID TO BLOW OFF WHICH CAN RESULT

IN SEVERE INJURY, DEATH, OR PROPERTY DAMAGE. TO AVOID THIS

POTENTIAL HAZARD, FOLLOW THESE INSTRUCTIONS.

13.Open the manual air relief valve on top of the filter.

14.Stand clear of the filter. Press the Start button on the pump.

15.Bleed air from the filter until a steady stream of water comes out.

16.Closethemanualairreliefvalve.

Motor Service

1.Protect from heat:

•Shade the motor and controller from the sun.

•Any enclosure must be well ventilated to prevent overheating. Particular attention should be paid to the motor fan cover and the cooling fins between the drive and the motor.

•Provideamplecrossventilation.

2.Protect against dirt:

•Protect from any foreign matter or splashing water.

•Do not store (or spill) pool chemicals near the motor.

•Avoid sweeping or stirring up dust near the motor while it is operating.

•If a motor has been damaged by dirt it voids the motor warranty.

3.Protect against moisture:

•Protect from splashing pool water.

•Protect from the weather.

•Protectfromlawnsprinklers.

•If a motor has become wet - let it dry before operating. Do not allow the pump to operate if it has been flooded.

•If a motor has been damaged by water it voids the motor warranty.

Note: DO NOT wrap motor and controller with plastic or other air tight materials. The motor and controller may be covered, but not wrapped in plastic, during a storm, for winter storage, etc., but never when operating, or expecting operation.

When replacing the motor, be certain that the motor support is correctly positioned to support the size of motor being installed.

IntelliFlo 4 Installation and User’s Guide

Page 19 Page 21
Page 20
Image 20
Pentair 100, 4 160 important safety instructions Motor Service
Page 19 Page 21

4 160, 100 specifications

Pentair 100 is an advanced water filtration system designed to address a variety of water purification needs for residential and commercial applications. Renowned for its efficiency and reliability, the Pentair 100 incorporates cutting-edge technologies that enhance the quality of water while ensuring ease of use.

One of the standout features of the Pentair 100 is its multi-stage filtration process. This system utilizes a combination of sediment filters, activated carbon filters, and advanced membrane technology to remove impurities including bacteria, viruses, heavy metals, and chlorine. The sediment filter captures larger particles, while the activated carbon filter removes organic compounds and improves taste and odor. The membrane technology employed in the system further refines the water by filtering out microscopic contaminants, ensuring purity.

The Pentair 100 is equipped with an innovative monitoring system that allows users to track filter performance and maintenance needs in real time. This feature is designed to optimize the lifespan of the filters and ensure that the system operates at maximum efficiency. Additionally, the intuitive LED indicators provide clear notifications regarding filter replacements and system status, simplifying the upkeep of the filtration unit.

Sustainability is another core aspect of the Pentair 100. The system is designed to reduce water wastage, making it an environmentally friendly option for consumers. Its efficient filtration process minimizes the need for bottled water, contributing to reduced plastic waste. Furthermore, the materials used in the construction of the unit are durable and recyclable, aligning with contemporary green initiatives.

The compact design of the Pentair 100 makes it suitable for various setups, whether it is for a small apartment or a larger commercial space. Installation is straightforward, with flexible options for under-sink or point-of-use configurations. This versatility extends to its compatibility with existing plumbing systems, allowing for seamless integration.

In summary, the Pentair 100 embodies advanced filtration technologies, sustainable operations, and user-friendly features, making it an excellent choice for anyone looking to improve their water quality. Its robust performance, combined with smart monitoring capabilities, ensures that users have access to safe and delicious water while promoting environmental responsibility. Whether for everyday use or special needs, the Pentair 100 stands out as a premier solution in the water filtration market.
Top Page Image Contents