1
IntelliFlo 4 Installation and User’s Guide
Section 1OverviewIntelliFlo 4 Variable Speed Pump
The IntelliFlo 4 variable speed pump is well suited for all of your pool, spa, cleaner, waterfall and other
water application. Using the control panel, IntelliFlo can use one of the four selectable preset speeds or the
pump speed can be adjusted to run at a specific speed. IntelliFlo out performs all conventional pumps in its
class. Advanced energy conservation features ensure that your filtration system is operating at peak
efficiency.
IntelliFlo 4 models
There are two IntelliFlo 4 models which operate identically with the exception of the maximum flow rate:
• IntelliFlo 4 160 operates at a maximum system flow of 160 gallons per minute (GPM)
• IntelliFlo 4 100 operates at a maximum system flow of 100 gallons per minute (GPM)
The IntelliFlo 4 variable speed pump can operate from 400 RPM to 3450 RPM with preset speeds of 750,
1500, 2350, and 3110 RPM. The pump can be adjusted from the control panel to run at any speed
between 400 RPM to 3450 RPM for different applications. The IntelliFlo pump control panel alarm LED
warns the user against under and over voltage, high temperature, over current and freeze protection.
External Control
Using a communication cable, IntelliFlo 4 can communicate with an IntelliTouch, EasyTouch or IntelliComm
via a two-wire RS-485 connection for remote speed control. The EasyTouch and IntelliComm provide the
ability to remotely control the IntelliFlo 4 with four preset speeds. The IntelliTouch can be setup to use eight
speeds with the IntelliFlo 4.
IntelliFlo 4 variable speed pump