![](/images/new-backgrounds/1101557/10155747x1.webp)
Temperature & Time Setting (Programming) | 24 |
|
|
TO CHANGE THE FACTORY TEMPERATURE SETTINGS:
1.Before changing the temperature, make sure the “Temperature” is in the right window, see pages 24 and 25, if “Time” is displayed, press the MODE key to change to the “Temperature Mode”.
SET
PROGRAM
MODE
2. To change the Pool Temperature setting, press the POOL key.
POOL OFF SPA
3. To Raise or Lower the Pool Temperature setting, press the proper TEMP key until the desired setting is displayed.
|
|
|
|
|
|
|
|
| TEMP |
| STEP | ||||||||
NOTE: During Programming of the Pool Temperature, the two buttons on the |
|
|
|
|
|
|
|
| TEMP |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
right are used to (IncreaseRaise ) or (DecreaseLower )the display setting numbers. |
|
|
|
|
|
|
|
|
|
NOTE: Pool Temperature is now set. |
|
|
|
|
|
|
|
|
|
4. You can leave the right window displaying the set “Temperature” or by pressing |
|
|
|
|
|
|
|
|
|
the MODE key, you can return to the “Time” Mode. |
|
|
|
|
|
|
|
| TEMP |
| STEP | ||||||||
NOTE: To |
|
|
|
|
|
|
|
| TEMP |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
while in the “Spa Heating” Mode. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TIME SETTING
1. Make sure heater is turned “OFF” and not in the POOL or SPA “ON” Mode.
POOL OFF SPA
2. Place the Controller in Programming Mode by depressing the SET and MODE buttons at the same time.
SET
PROGRAM
MODE
NOTE: During Programming of the Time Setting, the two buttons on the right
are used to (IncreaseRaise ) or (DecreaseLower ) the display setting numbers. |
|
|
|
|
|
| TEMP |
|
|
|
|
|
| TEMP | |
| STEP | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P/N 471593 | Rev. C |