DANGER! Risk of Electrical Shock or Electrocution!

This product must be installed by a licensed or certified electrician or a qualified pool serviceman in accordance with the National Electrical Code and all applicable local codes and ordinances. Improper installation will create an electrical hazard which could result in death --- or serious injury to pool users, installers or others due to electrical shock, and may also cause damage to property. Always disconnect the power to the pool light at the circuit breaker before servicing the light. Failure to do so could result in death or serious injury to serviceman, pool users or others due to electrical shock. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL.

WARNING — Important Safety Information for Pentair Niche and Light Installation

•All Niche and Light installations must conform with all codes. If local codes mandate a cord seal, use Pentair plastic niches (P/N 79206600 and P/N 79206700).

•Under no circumstances replace lights by splicing wire under water or behind niche.

WARNING — RISK OF ELECTRIC SHOCK AND INJURY.

USE ONLY THE INSTALLATION METHOD SPECIFIED BELOW.

Important Safety Information for Fountain Fixture Installations

Location of

Pentair Fountain Fixture*

Required Installation Method

Luminaire (Light) Use

(P/N 560000 – P/N 560001)

 

 

(P/N 560002 – P/N 560003)

 

 

 

 

Swimming Pool or Spa

Wet-Niche Swimming Pool

Fixture Housing (Forming Shell) ONLY.

 

(or Spa) Luminaire (Light)

DO NOT USE Fountain Fixture Stand.

 

 

 

Fountain

Wet-Niche Submersible

Fixture Housing (Forming Shell) or

 

Swimming Pool (or Spa)

Fountain Fixture Stand.

 

Luminaire (Light)

 

 

 

 

(*)Note: Wet-niche luminaires complying with requirements for both uses may bear both the Listed Wet-Niche Swimming Pool (or Spa) Luminaire UL Mark and the Listed Wet-Niche Submersible Luminaire UL Mark. A luminaire not bearing the corresponding UL Listing Mark is not considered by UL to have been produced under UL’s Listing and Follow-Up Service for the associated usage location.

© 2007 Pentair Water Pool and Spa, Inc. All rights reserved.

1620 Hawkins Ave., Sanford, NC 27330 • (800) 831-7133 • (919) 566-8000

10951 West Los Angeles Ave., Moorpark, CA 93021 • (800) 831-7133 • (805) 553-5000

This document is subject to change without notice.

Trademarks and Disclaimers: The Pentair Pool Products logo, Because reliability matters most, and AmerQuartz are registered trademarks of Pentair Water Pool and Spa, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Pentair Water Pool and Spa, Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

P/N • Núm/Pte. • Réf. 99101600

2

Rev. D • Rev. D • Rév. D 10-29-07

Page 1 Page 3
Page 2
Image 2
Pentair AmerQuartz important safety instructions USE only the Installation Method Specified below
Page 1 Page 3

AmerQuartz specifications

Pentair AmerQuartz is a leading player in the realm of high-performance water filtration solutions. Recognized for its innovative approach, Pentair AmerQuartz combines advanced technologies with engineering excellence, making it a trusted choice for a wide array of applications, including industrial, municipal, and commercial water treatment.

One of the standout features of Pentair AmerQuartz is its unique filtration media, which offers exceptional particle removal capabilities. The system employs a blend of graded granules designed to effectively capture sediment and other impurities, resulting in significantly improved water clarity and quality. This proprietary media not only enhances filtration efficiency but also extends the service life of the filter, reducing the need for frequent replacements and maintenance.

Another key characteristic of Pentair AmerQuartz is its versatility. The system can be tailored to meet specific filtration needs, regardless of the water source. Whether it’s treating potable drinking water, swimming pool water, or industrial effluent, AmerQuartz can efficiently adapt to varying flow rates and water conditions. This flexibility makes it an ideal solution for diverse environments, be it urban areas or remote locations.

Pentair AmerQuartz is also engineered with user convenience in mind. Its intuitive design facilitates easy installation and operation. Users can quickly monitor the system’s performance and maintenance needs through a user-friendly interface, ensuring ongoing optimal operation without excessive downtime.

Furthermore, the technology behind Pentair AmerQuartz incorporates advanced automation features. These technological advancements allow for real-time monitoring and control of the filtration process. Users can adjust parameters remotely and receive alerts for maintenance or anomalies, thereby optimizing efficiency and minimizing operational costs.

Sustainability is at the forefront of Pentair AmerQuartz's commitment to innovation. The systems are designed to minimize water waste and energy consumption, promoting environmentally responsible practices within water treatment processes.

In summary, Pentair AmerQuartz stands as a testament to cutting-edge design and effective engineering in the water treatment industry. With its advanced filtration capabilities, user-friendly features, and commitment to sustainability, it continues to set new standards for performance and reliability in water filtration solutions. Users can trust that with Pentair AmerQuartz, they are investing in a superior product that prioritizes both quality and efficiency.
Top Page Image Contents