Turning the Power On

Sliding the power switch to the (ON) position will turn on the power. The ready lamp will light up when the flash is charged. Sliding it to the (OFF) position will turn off the power.

Test Flash

Check that the ready lamp is lit, then press the test button (TEST). The test flash will discharge.

Auto Power Off Function

When the flash unit is left unused for about 3 minutes with the power switch set to the (ON) position, it automatically turns off to save the power.

Quick Start Function

If the flash unit is mounted on autofocus cameras, press the shutter release button half way to turn on the power.

8