13. The zoom reflector

The zoom reflector (main reflector)

The camera can automatically adjust the zoom reflector to the focal length of the lens; alternatively, this can also be done manually with the Zoom button and the „+“ or - buttons .

Zoom 20: Illumination with wide angle diffuser (for 35 mm, from 20 mm focal length onwards) Zoom 24:Wide-angle illumination (for 35 mm, from 24 mm focal length onwards) Zoom 28:Wide-angle illumination (for 35 mm, from 28 mm focal length onwards) Zoom 35:Wide-angle illumination (for 35 mm, from 35 mm focal length onwards) Zoom 50:Standard illumination (for 35 mm, from 50 mm focal length onwards)

Zoom 70:Telephoto illumination (for 35 mm, from 70 mm focal length onwards) Zoom 85:Telephoto illumination (for 35 mm, from 85 mm focal length onwards) Zoom 105:Telephoto illumination (for 35 mm, from 105 mm focal length onwards)

For manual zoom control press the Zoom button and adjust the desired zoom setting with the „+“ or - button .

In the event that your camera with SCA adapter automatically transfers the zoom setting of the lens, simply press the Zoom button twice to reactivate automatic zoom control after a manual zoom reflector adjustment.

Ex-Zoom mode (extended zoom)

The Ex-Zoom mode can only be used with system cameras that are capable of exchanging data via the SCA 3000 adapter.

This mode was created for professional use during reporting work in dense crowds. In the extended zoom mode, the flashgun’s zoom reflector position is automatically adjusted one increment further towards a wider angle in relation to the focal length of the camera lens, to guarantee wider coverage.

Example: Focal length of camera lens 50 mm; zoom reflector setting 35 mm

13. The zoom reflector

Ex-Zoom-mode

 

 

 

 

 

 

 

 

 

 

Fig. 25: Settings for Ex-Zoom mode

The flashgun’s larger angle of coverage provides a higher safety margin for perfect lighting of the subject. In normal operation, the Ex-Zoom mode produces a softer illumination of the subject because more light is reflected back from the walls and ceiling.

Setting procedure for the Ex-Zoom mode:

• Switch off the flashgun with the main switch

for approx. 5 seconds.

• Hold down the zoom button

on the flashgun.

 

• Switch on the flashgun with the main switch .

 

• Release the zoom button .

 

 

• Procede in the same sequence to switch off the ex-zoom mode.

44

45

Page 25
Image 25
Pentax 40 MZ-3i Zoom reflector main reflector, Setting procedure for the Ex-Zoom mode, Ex-Zoom-mode