Attaching a Lens
1 Make sure that the camera is turned off.
2 Remove the body mount
cover (1) and lens mount cover (2).
After removing the cover, be sure to put the lens down with the lens mount side facing upward.
3 Align the lens mount index 
(red dots: 3) on the 
camera and the lens, and 
secure by turning the lens clockwise until it clicks.
3
To remove the lens
Attach the lens cap → turn the lens counterclockwise while pushing the lens unlock button (4).
4
uCaution
•If the lens is removed while the power is on, the shutter release button will be locked. Do not attach or remove the lens while the power is on.
•When attaching or removing the lens, choose an environment that is relatively free of dirt and dust.
•Keep the body mount cover on the camera when a lens is not attached.
•Be sure to attach the lens mount cover and lens cap to the lens after removing it from the camera.
•Do not insert your fingers inside the lens mount of the camera or touch the CMOS sensor.
•The camera body and lens mount incorporate lens information contacts. Dirt, dust, or corrosion may damage the electrical system. Please contact your nearest service center for professional cleaning.
•We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
2
Started Getting
21