•The date and time may be reset if you leave the battery out of the camera for long periods of time. If this happens, set the current date and time.
1 Slide the battery cover in the direction of 1.
1
2
2 Insert the battery until it locks into place with the A mark facing toward the lens.
To remove the battery, push the | 3 |
battery lock lever in the direction of 3.
3 Close the battery cover, |
|
and slide it in the direction |
|
of 5. | 5 |
| 4 |
tMemo
•The battery level may not be displayed properly if the camera is used at low temperatures or when performing continuous shooting for a long time.
•Battery performance temporarily decreases as the temperature decreases. When using the camera in cold climates, have extra batteries at hand and keep them warm in
your pocket. Battery performance will return to normal when returned to room temperature.
•Have extra batteries ready when traveling overseas, or taking a lot of pictures.
Using the AC Adapter
We recommend the use of the AC adapter kit
1 Make sure that the camera is turned off, and open the battery cover.
Remove the battery if it is inserted in the camera.
2 Pull down the connection |
|
cable cover (1) on the |
|
bottom side of the battery |
|
chamber, and insert the | 2 |
DC coupler into the battery | 1 |
| |
chamber. |
|
To remove the DC coupler, push |
|
the battery lock lever in the direction of 2. |
|
2
Started Getting
23