Pentax 10720, 11520, Q7 79

	Error Messages	Description
	Not enough battery
	power remaining to	Appears during Pixel Mapping or when
	activate Pixel Mapping	trying to update the firmware if the battery
	Not enough battery	level is insufficient. Install a fully charged
	power remaining to	battery.
	update the firmware

	Unable to update firmware.	Unable to update the firmware. The
	There is a problem with the	update file is damaged. Try downloading
	firmware update file	the update file again.
		The maximum folder number (999) and
	Image folder cannot be	file number (9999) are being used, and no
	created	more images can be saved. Insert a new
		memory card or format the card.

	Unable to store image	The image could not be saved because of
	Unable to store image	a memory card error.
		a memory card error.

		The DPOF settings could not be saved
	Settings not stored	because the memory card is full. Delete
	Settings not stored	unwanted images and perform DPOF
		unwanted images and perform DPOF
		setting again. (p.68)

	The operation could not be	The camera was unable to adjust the
	The operation could not be	manual white balance. Try the operation
	completed correctly	manual white balance. Try the operation
	completed correctly	again.
		again.

		You cannot select more than the
	No more images	maximum number of images for Index,
	can be selected	Select & Delete, RAW Development,
		Select image(s) for Eye-Fi, and DPOF.

		There are no images that can be
	No image can be processed	processed using Digital Filter or RAW
		Development function.

	Error Messages	Description
		Appears when you try to perform Resize,
		Cropping, Red-eye Edit, Digital Filter,
	This image cannot be	Movie Edit, RAW Development, Save as
	This image cannot be	Manual WB, or Save Smart Effect for
	processed	Manual WB, or Save Smart Effect for
	processed	images captured with other cameras, or
		images captured with other cameras, or
		when you try to perform Resize or
		Cropping for minimum file size images.

	The camera failed	The creation of an index print image
	to create an image	failed.

	This function is not available	You are trying to set a function that is not
	in the current mode	available for the capture mode that is set.
	in the current mode	(p.69)
		(p.69)
		The camera will turn off because its
	The camera will turn off	internal temperature gets too hot. Leave
	to prevent damage from	the camera turned off until it has had time
	overheating	to cool down before turning on the
		camera again.
	Set the Eye-Fi communication	Images cannot be transferred when [Eye-
	Set the Eye-Fi communication	Fi Communication] is not set to [SELECT]
	to “SELECT”	in [Eye-Fi] of the D2 menu. (p.67)
		in [Eye-Fi] of the D2 menu. (p.67)

	Image not found	There are no images that can be
	Image not found	transferred when an Eye-Fi card is used.
		transferred when an Eye-Fi card is used.

		This folder cannot be selected because
	Cannot be selected	the number of files exceeds the maximum
		number allowed. (p.67)

Appendix