Perle 10/100 Media Converter Module – Installation Guide
2
Overview
This document contains instructions necessary for the installation and
operation of the Perle 10/100 Ethernet Media Converter Module(s) (C-110
and CM-110) that are used in conjunction with a Perle MCR Chassis. The C-
110 are unmanaged media converter modules, and the CM-110 are the
managed versions. These products convert a 10/100Base-T connection
(copper) to a 100Base-X connection (fiber). The fiber connection can be
either single mode (SM) or multimode (MM) and can operate over different
wavelengths and distances, depending on the model (see table below). For
information on management features of the CM-110 module, refer to the
MCR-MGT Module User’s Guide.
Model Connector Mode - Distance Wavelength
C-110-M2ST2
CM-110-M2ST2 SC/ST/LC MM – 2 km/1.2 mi. 1310 nm
C-110-S2SC20
CM-110-S2SC20 SC/ST/LC SM – 20 km/12.4 mi. 1310 nm
C-110-S2SC40
CM-110-S2SC40 SC/ST/LC SM - 40 km/24.9 mi. 1310 nm
C-110-S2SC80
CM-110-S2SC80 SC/ST/LC SM - 80 km/49.7 mi. 1550 nm
C-110-S2SC120
CM-110-S2SC120 SC/ST/LC SM - 120 km/74.6 mi. 1550 nm
C-110-S1SC20U
CM-110-S1SC20U SC SM - 20 km/12.4 mi. 1310/1550 nm
C-110-S1SC20D
CM-110-S1SC20D SC SM - 20 km/12.4 mi. 1550/1310 nm
C-110-S1SC40U
CM-110-S1SC40U SC SM - 40 km/24.9 mi. 1310/1550 nm
C-110-S1SC40D
CM-110-S1SC40D SC SM - 40 km/24.9 mi. 1550/1310 nm
Note 2: Please refer the Perle web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/