Duplex (copper) (Switch 4)
Switch Position | Mode |
|
|
Up (default) | Full |
|
|
Down | Half |
|
|
Note: When Auto Negotiation (SW1) is set to Off, the Media Converter will use this Duplex setting for its copper connection.
Up: The Media Converter Module will be set to Full Duplex mode.
Down: The Media Converter Module will be set to Half Duplex mode.
Speed (copper) (Switch 5)
Switch Position Mode
Up (default) | 100 |
|
|
Down | 10 |
Note: When Auto Negotiation (SW1) is set to Off, the Media Converter Module will use this Speed setting for its Ethernet copper connection.
Up: The Media Converter will be fixed at 100 Mbps.
Down: The Media Converter will be fixed at 10 Mbps.
8 | Perle 10/100 Media Converter Module – Installation Guide |
