Servicing Information
93
the bridge/router does not start in ZMODEM receive mode,
refer to Appendix D: Servicing Information for recovery
procedure.
The ZMODEM Load Flash operation may be aborted by aborting
the ZMODEM transfer and then entering 5 control-X characters
“^X” from the console keyboard. After the control-X characters are
sent, the router will display a limited menu system. Choose the
Abort Load option from the Load FLASH Set-Up menu. This will
cause the router to reset and return to normal operations operating
from the existing software.
If the ZMODEM transfer operation needs to be restarted after it
has been canceled or after loading the first file, simply choose the
Console (ZMODEM) option from the Load FLASH Set-Up menu
once again.
Considerations:
When the router is placed in Console load BOOT mode, the
LAN interface and the WAN interface will be disabled. The
router will only accept information from the console
management port.
The BOOT code of the P850 may be upgraded by performing a load
of the “###.all” file from the Operational/BOOT Code directory on
the CD-ROM.