Specifications
Explained
Mains Input Voltage
100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz
(Set within the CD1 at time of manufacture)
Dimensions |
|
Width | 430mm (16.9”) |
Height | 106mm (4.2”) |
Depth | 323mm (12.7”) |
Fuse Ratings |
|
Mains input fuse |
|
100 – 125V: | 2SB slow blow 0.5A |
200 – 250V: | 2SB slow blow 0.5A |
| (user serviceable) |
Weight |
|
Net: | 7.8kg (17.2lb) |
| (CD player only) |
Gross: | 10.8kg (23.8lb) |
| (CD player, accessories and packing material) |
Rated Output | 2.0VRMS |
This is the reference output level to which other specifications, such as signal to noise ratio and total harmonic distortion, are referred.
Digital Output |
Indicates the
Output Impedance | 100Ω |
Output Impedance indicates the ability of the unit to drive the Line Level Output. The low impedance of the CD1 means that it will drive any combination of cable configuration (length, capacitance, etc.) and component impedance with ease whilst maintaining signal integrity.
Digital Load Impedance | 75Ω |
Specifies the load impedance required for the coaxial digital interconnect.
Frequency Response | 20Hz to 20kHz, ±0.5dB |
Describes the frequency range where the amplitude or strength of the output signal deviates from the source material by no more than 0.5dB
Total Harmonic Distortion (THD+N) | 0.004% @ 1kHz |
Total Harmonic Distortion + Noise is the percentage of output signal which is made up of frequencies added due to harmonics of the fundamental frequency and noise.
29
