1 Unpacking and Placement
Unpacking Procedure
Note:
Note:
Box Contents
Placing Your CD1
The CD1 is packaged for maximum protection. Please carefully read the instructions below before proceeding to unpack the unit. Be extremely careful.
Inspect both ends of the cardboard box and open at the end without the central staple by slitting the reinforced tape at either side.
Fold back the flaps and tip the package on end and the inner box will slide out.
Lay the inner box down flat and upright, open it conventionally by separating the top tray from the bottom.
The product can now be removed from the bottom packaging. This will be easier if you have someone to help you by holding the base of the box.
Alternately, the bottom tray and player could be tipped upside down and the bottom packaging removed. If opened in this manner, please ensure that you turn the contents over again.
Be very careful to secure the unit if you are planning to flip the package upside down.
Remove the two white polystyrene protectors off either side of the player, leaving the black material covering.
Pull back the material and remove the protective black tissue from the front panel.
The player is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x CD1 Compact disc player
1 x CD1 Product manual
1x Perreaux remote control
2 x AAA batteries
1x Screwdriver
1x Detachable AC power cord
The CD1 should generally be placed close to your amplifier, keeping the interconnect cabling short.
6
