4

Rear Panel Functions

Caution! Please make all changes at minimum volume setting. Only increase the volume after the connections have been made.

Digital Output

Using a standard 75Ω coax digital cable with RCA termination, connect the digital output to the coax digital input on the external D/A converter.

These high quality gold plated sockets are highly conductive, corrosion resistant, and provide less potential for corrosion induced distortion.

Refer to Chapter 13 “Specifications” for more details.

Analog Output

Standard single-ended outputs (RCA) supplying analog signals to the source inputs of an audio preamplifier, integrated amplifier or receiver.

Using quality audio interconnect cables, connect the left channel output of the ECD2 to the left channel input on the preamplifier or other component and the right channel output to the right channel input on the preamplifier or other component.

Refer to Chapter 13 “Specifications” for more details.

Serial Number

The serial number is unique to your ECD2. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative.

Input Voltage and Fuse Rating

Input Voltage

It is important that the ECD2 be operated from the correct AC mains voltage. This unit is factory set for the voltage applicable to the original country of destination.

10