The ECD2 will operate satisfactorily within a voltage variation of up to ±5% of that voltage at which the unit has been set.

If you require the voltage setting to be altered, e.g. relocation to another area, city or country, or extraordinarily high or low voltages, please contact your Perreaux dealer. Qualified service personnel can only perform this modification.

Caution! Never attempt to connect the unit to the incorrect voltage. Severe

damage can result from applying incorrect voltage to the unit.

Fuse Rating

The fuse rating displayed here, refers to the rating of the mains inlet fuse.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

Caution! Never replace the fuses with any other ratings other than the one specified.

AC Mains Input and Fuse

AC Mains Input

An IEC-standard mains input is provided at the rear of the unit. The AC cord set is removable, allowing you to upgrade to a cord set of your preference.

Caution! Prior to connection to the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage. Severe damage can result from applying incorrect voltage to the unit.

Mains Fuse

The ECD2 is equipped with a user serviceable AC mains fuse. In the event of fuse failure, always replace with the same type and value fuse. Remember, fuses do not usually blow without a reason. Any doubts about fuse failure should be conveyed directly to your Perreaux dealer.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

Caution! This is the ONLY user accessible fuse.

Never replace the fuses with any other ratings other than the one specified on the rear panel.

Always ensure your ECD2 is disconnected from the mains supply before attempting to change the mains fuse.

11