Perreaux ECD2 Unpacking and Placement

1		Unpacking and Placement
		The ECD2 is packaged for maximum protection. Please carefully read the
		instructions below before proceeding to unpack the unit. Be extremely careful.
Unpacking		à Inspect both ends of the cardboard box and open at the end without the
Procedure		central staple by slitting the reinforced tape at either side.
		à Fold back the flaps and tip the package on end and the inner box will
		slide out.
		à Lay the inner box down flat and upright, open it conventionally by
		separating the top tray from the bottom.
		à The product can now be removed from the bottom packaging. This will
		be easier if you have someone to help you by holding the base of the
		box.
		à Alternately, the bottom tray and player could be tipped upside down
		and the bottom packaging removed. If opened in this manner, please
		ensure that you turn the contents over again.
Note:
		Be very careful to secure the unit if you are planning to flip the package
		upside down.
		à Remove the two white polystyrene protectors off either side of the
		player , leaving the black material covering.
		à Pull back the material and remove the protective black tissue from the
		front panel.
		The player is now unpacked and ready for further installation.
Note:
		Please retain all packaging material for future transport.
Box	1 x ECD2 Compact disc player
Contents	1 x ECD2 Product manual
		1 x Perreaux remote control
		2 x AAA batteries
		1 x Detachable AC power cord
Placing	The ECD2 should generally be placed close to your amplifier, keeping the
Your ECD2	interconnect cabling short.

6