Perreaux Prisma 350 owner manual Fuse Rating

Models: Prisma 350

1 38
Download 38 pages 9.64 Kb
Page 13
Image 13
Fuse Rating

Caution!

Caution!

Note:

Caution!

Fuse Rating

The fuse rating displayed here, refers to the rating of the mains inlet fuse.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

Never replace the fuses with any other ratings other than the one specified.

Manual background AC Mains Input

An IEC-standard mains input is provided at the rear of the unit. The AC cord set is removable, allowing you to upgrade to a cord set of your preference.

Prior to connection to the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage. Severe damage can result from applying incorrect voltage to the unit.

Manual background Earth Lift Switch

This switch enables the user to isolate the internal signal earth of the amplifier from the mains earth and is useful if system hum is a problem. Setting this switch DOWN connects the internal signal earth to mains earth and is the normal position. Setting to UP disconnects the signal earth from the mains earth.

Activating this switch has no effect on chassis earth, maintaining the connection to mains earth.

Manual background Mains Fuse

The 350 is equipped with a user serviceable AC mains fuse. In the event of fuse failure, always replace with the same type and value fuse. Remember, fuses do not usually blow without a reason. Any doubts about fuse failure should be conveyed directly to your Perreaux dealer.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

This is the ONLY user accessible fuse.

Never replace the fuses with any other ratings other than the one specified on the rear panel.

Always ensure your 350 is disconnected from the mains supply before attempting to change the mains fuse.

Manual background Remote trigger input and output

The remote trigger system is designed to switch on or off the 350 and any connected peripherals. If the 350 is switched on or off via the remote input trigger, any peripherals connected via the slave trigger output will also be switched on or off.

13

Page 13
Image 13
Perreaux Prisma 350 owner manual Fuse Rating