1 Unpacking and Placement
Unpacking Procedure
Note:
Note:
Box Contents
Placing Your 350
The 350 is packaged for maximum protection. Please carefully read the instructions below before proceeding to unpack the unit. Be extremely careful.
Inspect both ends of the cardboard box and open at the end without the central staple by slitting the reinforced tape at either side.
Fold back the flaps and tip the package on end and the inner box will slide out.
Lay the inner box down flat and upright, open it conventionally by separating the top tray from the bottom.
The product can now be removed from the bottom packaging. This will be easier if you have someone to help you by holding the base of the box.
Alternately, the bottom tray and amplifier could be tipped upside down and the bottom packaging removed. If opened in this manner, please ensure that you turn the contents over again.
Be very careful to secure the unit if you are planning to flip the package upside down.
Remove the two white polystyrene protectors off either side of the amplifier, leaving the black material covering.
Pull back the material and remove the protective black tissue from the front panel.
The amplifier is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x 350 Power amplifier
1 x 350 Product manual
1 x Detachable AC power cord
3 x Performance analysis charts
The 350 should generally be placed close to your preamplifier, keeping the interconnect cabling short.
We strongly recommend keeping the 350 on it’s own separate shelf to allow for proper ventilation.
7
