1Unpacking and Placement
Unpacking Procedure
Note:
Box
Contents
Placing Your
SXCD
Ventilation Requirements
6
The two components which comprise the SXCD CD player are packaged for maximum protection. To open, sit each box upright and cut the reinforced tape at the top of each box. Each module can now be removed.
Pull the foam protecting
The SXCD Compact Disc Player is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x SXCD Compact Disc Player Electronics
1 x SXCD Compact Disc Player Transport
1 x Product manual
1 x Detachable AC power cord
1x
1x 75< coaxial cable
1x BNC to RCA adaptor
3 x Performance analysis charts
The SXCD should generally be placed close to your preamplifier or integrated amplifier, thus keeping interconnect cabling between the SXCD and associated components as short as practical. This will reduce the systems susceptibility to radio frequency (RF) interference and the negative effects associated with long cables.
The SXCD is a low power electronic device. Ventilation requirements are not considered an important factor in product placement.
In the event that the SXCD is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 13).
