To Set the Static Correction Level
Read all steps before attempting to set | 2D | 2E |
the Static Correction Level. |
|
|
1. Remove the clear plastic cover with the edge of the Test Light Tool to expose
the Correction Level Button (2D).
2. With the battery installed, press the Correction Level Button and release
when the Receiver LED Indicator Light lights up (2E).
3. The Receiver LED Indicator Light will
emit a series of flashes representing the Static Correction Level.
4. Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the
previous series of flashes.
5. After setting the Static Correction Level, replace the cover to protect the Correction Level Button.
The Static Correction levels increase in strength from 1 to 6. Pushing the Correction Level Button while the Receiver Collar is on level 6 will cause the Receiver Collar to revert to level 1. Refer to the Function and Response Table to choose the Static Correction level that best fits your pet.
The Receiver Indicator Light acts as a low battery indicator. The light will flash every 4 to 5 seconds when battery replacement is required.
Battery Contact Verification
Remove Receiver Collar from your pet. Press the button and verify that the LED light illuminates. If the LED light does not come on remove the battery. Locate the metal tabs in the battery well. Gently lift the tabs to ensure that the battery will make good contact. Replace the battery into the Receiver Collar. Press the button and check that the LED light illuminates.
Function and Response Table
Indicator Light | Static |
|
|
| |
Correction | Receiver Collar Function | Temperament of Pet |
| ||
Response |
| ||||
Level |
|
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
1 | Flash | 1 | No Static Correction, Tone Only | Initial Training Mode |
|
|
|
|
|
|
|
2 | Flashes | 2 | Low Static Correction | Timid |
|
|
|
|
|
|
|
3 | Flashes | 3 | Timid or Average |
| |
|
|
|
|
|
|
4 | Flashes | 4 | Medium Static Correction | Average Energy |
|
|
|
|
|
|
|
5 | Flashes | 5 | Average or High Energy |
| |
|
|
|
|
|
|
6 | Flashes | 6 | High Static Correction | High Energy |
|
|
|
|
|
| |
Flashes once every |
| Indicates Low Battery |
|
| |
4 to 5 seconds |
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Over Correction Protection
If your pet enters the Boundary Zone or continues anywhere beyond the Pet Area, this feature limits the Static Correction duration to 30 seconds.
In the unlikely event that your pet leaves the Pet Area, he will not receive a Static Correction upon return to the Pet Area.
8 |