Bottom Door Section - Section of Patio Panel with the pet door
Height Adjuster - A metal panel with springs located above the top door section to adjust Patio Panel height
Sliding Glass Door Frame Opening - Opening in sliding glass door between the upper door track and the lower door track
Exposed Sliding Glass Frame - Sliding glass door frame that is visible and exposed in interior and exterior wall
Recessed Sliding Glass Frame - Sliding glass door frame that is flush with or barely visible in interior or exterior wall
Rise - The height from the floor to the bottom of the flap in the pet door. It is the height the pet must step over to enter or exit the pet door.
Patio Panel Rib Line - Raised ribbed lines on left and right side of Patio Panel frame to indicate drilling outside of rib line area. Do not drill inside of the rib line as glass is present and will break if drilling occurs in this area.
Operating Temperature Range: 0º F to 100º F
Installing Your Freedom™ Patio Panel
THE STEPS BELOW ARE FOR AN EXPOSED SLIDING GLASS FRAME INSTALLATION. IF INSTALLING THE PATIO PANEL INTO A RECESSED SLIDING GLASS DOOR FRAME, CONTACT OUR CUSTOMER CARE CENTER OR VISIT WWW.PETSAFE.NET FOR A METAL BRACKET KIT,
NOTICE
Prior to installation and drilling, consult your sliding glass door manufacturer’s warranty. Unauthorized changes or modifications may void the warranty. Installing screws into vinyl door frames or door jambs may crack the vinyl.
Step | Measure | |
1 |
|
|
| 1 | |
|
|
|
1 Prior to any Freedom™ Patio Panel Pet Door purchase, you must determine the height of your sliding glass door frame opening. Measure from highest point in upper door track to lowest point in lower door track.
www.petsafe.net5
