Installation and commissioning
8.01.02 Assemble the mounted motor
7 | 7 |
| 5 |
6
4 | 1 | 3 | 2 |
Fig. 8 - 02
●Fix bearing plate 1 on to motor 2 using screws 3, as shown in fig.
●Mount drive belt wheel 4 onto motor shaft and attach with screws 5.
●Tilt bearing plate 1 with motor 2 slightly to the side and lay drive belt 6 onto the drive belt wheels.
●Align bearing plate 1 of motor 2 with machine housing and attach with screws 7.
●Tighten drive belt by pivoting the motor, looses screws 3 slightly to do so.
8.01.03 Fit the belt guard of the
● Attach belt guard 1 with screws 2.
2 
2 1
Fig. 8 - 03
19