BiliTx
parents’ manual
4. Cleaning
This section explains how to clean the BiliTx system.

Cleaning the Illuminator Device and Fiber

Optic Panel

Follow the instructions in this section any time the Illuminator device
or ber optic panel is dirty.
1. Use soapy water, a 10% bleach solution or full strength ammonia.
2. Use a soft sponge or cloth to apply the cleaner.
3. Apply the cleaning solution to the sponge or cloth and wipe
down the ber optic panel and Illuminator.
4. Allow the equipment to air dry. DO NOT DRY WITH ANY MEANS
OF ARTIFICIAL HEAT.
5. Wipe the Illuminator device and panel with a dry cloth.
If the in-use carrying case becomes soiled, it can be wiped with a
damp cloth.
CAUTION
Be sure the Illuminator device
is turned o and is unplugged
before cleaning. Do not immerse
any part of the equipment in
any liquid.
CAUTION
Keep the ber optic panel away
from sharp objects that could
scratch or puncture the cover.
WARNING
When cleaning, DO NOT USE:
• Phenolic compound based
germicide cleaner/disinfectant
• Gluteraldhyde disinfectant/
sterilants
• Regular commercial cleaners or
laundry detergents
• Iodine solutions, strong acids or
strong alkali solutions
These solutions could leave
residue on the surfaces, and /
or be abrasive or harmful to the
infant.